Cylinder Head

 

 

G & A Equipment and Machine performs work on cylinder heads of all major engine manufactures including Caterpillar, Cummins, Detroit, Mack and Navistar for the mining, hauling, industrial or gas markets.

 

All cylinder heads can be cleaned, pressure checked, and magnafluxed to check for cracks.

 

The customer has two options for repair.

 

The first is a “steam, clean and test” this insures that the valves hold a vacuum, the tubes don’t leak and the cylinder head is not cracked.

 

The valves are not removed from the head and the springs are not checked for tension.

 

This repair is simply for customers who have a head gasket leak and want to insure their head is not cracked.

 

The second is a complete overhaul of the cylinder head. Below is a list of repairs that can be performed.

​

• Resurfacing of the cylinder head

• Injector tube replacement

• Pre-combustion chambers repaired

• Magnetic particle inspection

• Pressure test abilities for cracks and leaks

• Valve seats and guides replaced

• Re-machine fire ring grooves

• Valve seat angles cut with 3 angle inserts in same set up

• Resurface exhaust ports

• Crack repair

• Remove and install cam bearings on overhead cam engines

• Repair cam bearing bores on overhead cam engines

• Extensive line of rebuilt cylinder heads ready to ship